Plastic lumps are hard, dense and irregular pieces of plastic produced during the plastic manufacturing process. Breaking these plastic lumps down into small pieces will make it easier for manufacturers and recyclers to reuse the plastic. The Shred Maxx Plastic Lumps grinder is one machine that can grind plastic lumps of HDPE, PP, and LDPE plastic lumps into small granules and flakes.
It is a ruggedly constructed machine complete with an industrial-grade motor and rotor with blades to reduce the size of the material.
Plastic lumps are hard and solid chunks of plastic obtained from plastic processing. These may be very heavy and awkward to handle without appropriate size reduction equipment.
Some common examples are:
The size and nature of plastic are important considerations in choosing appropriate grinding equipment.
Heavy plastic lumps need equipment designed for their size and physical properties. The lumps grinder uses a strong frame, a high-powered motor and hardened cutting blades to process solid plastic material.
Key features include:
The machine reduces solid plastic lumps through a cutting process. Its rotor and hardened blades work together to cut the material into smaller pieces.
The main stages include:
The final output depends on the screen size and the material being processed.
A Plastic lumps crusher machine is relevant to operations that need to reduce solid plastic lumps before further processing. The published product information identifies the following applications:
The following specifications are published on the Lumps Grinder product page.
| Parameter | Published specification |
|---|---|
| Throat size | 25 × 25 inches |
| Number of blades | 3 rotating and 2 fixed |
| Screen size | 12–15 mm standard; as per customer requirement |
| Motor power | 25 HP / 18.75 kW |
| Voltage | 415 V, 50 Hz, 3-phase (3P + N + E) |
| Throughput | 400–600 kg/hour with a 15 mm screen |
Throughput is the published figure for a 15 mm screen. Actual suitability should be assessed against the material and operating requirements.
These details help establish whether the listed Lumps Grinder is suitable for your plastic processing application.
The Lumps Grinder is designed for solid, heavy and uneven HDPE, PP and LDPE plastic lumps. Share your material details when enquiring about the machine.
Both terms can describe equipment used for size reduction, but the machine's actual cutting mechanism and output depend on its design. Shred Maxx lists this product as a Lumps Grinder.
The published standard screen size is 12–15 mm, with other screen sizes available according to customer requirements.
The published throughput is 400–600 kg per hour with a 15 mm screen. Throughput can vary according to operating conditions and the material being processed.
Looking for a Plastic lumps crusher machine or Plastic lumps grinder machine for heavy plastic waste? Contact Shred Maxx to discuss your material, lump dimensions and output requirements.
Get in touch with Shred Maxx to enquire about the Lumps Grinder and its available configurations.